8 long Collar Ferrules .355" fit Ping I S & G series IRON & Wedge not 4 Glide

Description

Ferrule crack while installing ? showing air bubbles after turned ? Acetone won't shine the ferrule ?? Uneven Color ? Deform after high trunk temperature ?
Try our ferrules, you will not going to face those troubles no more.
8 Golf iron Ferrules
Product made in Taiwan
Ship from USA
Fit later Ping I , S & G series Irons & Wedges with deep collar Ferrules
Fit tip size .355" taper tip shaft
length without collar : .65 " ( 16.45 mm) original Ping .58 " 14.2 mm
Collar depth : .345" ( 8.5 mm )
OD : .529" (13.4 mm )
These Collared Ferrules will ensure shaft sits as close as center in the hosel
without epoxy glass beads or shims
Tips for Hobbyist to install ferrules
1. If you epoxy ferrules with shaft
apply epoxy inside of ferrule as lubrication than install ferrule to the shaft
2. If you don't epoxy ferrules with shaft
please deep the ferrules in the hot water for more than 30 sec then install the ferrule to the shaft
#5 ( last photo ) showing finished ferrule after turn & polished