-40%

Indoor P3.91 Led Module 64x64 dots 250x250mm 1/16s RGB Full color Led Wall Panel

$ 36.95

Availability: 56 in stock
  • Condition: New
  • LED Color: RGB
  • Brand: ARGBROW
  • Number of LEDs: 4096
  • Type: 64x64 Dot Matrix

    Description

    Product standard
    P3.91mm
    Pixel configuration
    SMD2121, 3 in 1
    LEDs configuration
    Red:wave length: 615~630nm;700-1000mcd
    Green:wave length: 515~530nm;2100-2300mcd
    Blue:wave length: 465~475nm;450-600mcd
    Pixel pitch (mm)
    3.91
    Pixel density(dots/㎡)
    65536
    Calibrated brightness(cd/sqm,nit)
    1100 nits(adjustable)
    Calibrated brightness proportion ratio
    R: G: B = 30%:60%:10%(adjustable)
    Color temperature
    3,500° — 9,500° K(adjustable)
    Contrast ratio
    4,000:1(adjustable)
    Brightness adjustment(dimming)
    100 grade auto/manual-adjustment
    View angle(degree)(50% brightness)
    Horizontal: 120° (60° off center); Vertical: 70° (+25°/-45° off center)
    Readability viewing angle
    Horizontal: 150° (75° off center); Vertical: 90° (+35°/-55° off center)
    Refresh rate(Hz)
    >1920 Hz(adjustable)
    Frame frequency(Hz)
    >60 Hz
    Interface port
    DVI interface(DVI connector)
    Input signal
    VGA, Video, AVI, MOV, MPG, DAT, VOB etc.
    Protection grade
    IP31 front side/IP31 backside
    LED Drive
    Constant-current drive
    Lifetime (hours)(50% brightness)
    100,000 hours
    Signal transmission direction
    Horizontal
    Operating temperature (Celsius degree)
    -10~+40'
    Storage temperature (Celsius degree)
    -15~+50'
    Operation humidity (RH)
    10-75%
    Servicing
    Front and back serving optional
    Control mode
    Synchronous & asynchronous available
    Communication options
    Wire Ethernet, Fiber Ethernet,RF wireless,GPRS
    Maximum power consumption (W/SQM)
    650
    Average power consumption (W/SQM)
    260
    Screen operation mode (scan/static)
    1 / 16
    We have different type cabinets, if you don't leave messge tell us which one you need, then we will choose one for you.
    Note
    Different batches of Led modules maybe have some difference of color and brightness, please buy all led modules of one led display
    screen at one time. And if possible, please buy some led modules as spare parts.
    The picture of PCB board and screws holes in the
    description maybe different from what you receive because of the updating version. If you want to buy same PCB board and same
    screw holes led modules, please contact us in advance.
    Thanks for your understanding!
    Packing list
    1x P3.91 Indoor Led module, (Left module or right module).
    16PIN cable: 4 pcs.
    5v power cable: 1 pcs.