RIDGID PORTABLE WHEELED 1822-I Auto-Chucking PIPE THREADER 535 DIE HEAD 141 161

Description

WE COMBINE SHIPPING, S0 CHECK OUT OUR OTHER ITEMS....
CLICK HERE!!!
ATTENTION, NOTE FROM SELLER:
THE UNIT IN THE PIC'S IS SOLD, BUT WE HAVE ANOTHER JUST AS NICE!
YOUR LOOKING A USED BUT NEWER 1822-I RIDGID THREADER, IN
"VERY NICE CONDITION
"!
IT COMES WITH A
815A SELF OPENING, SELF OILING DIE HEAD LOADED WITH DIES 1/2"-3/4"AND WHAT LOOK LIKE A NEW SET OF 1"-2",
WITH THE THROUGH THE HEAD OILING SYSTEM
(this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually! This saves a full step and probably cuts the time to thread a pipe by 25%!).
THIS UNIT ALSO HAS AN AUTOMATIC CHUCKING SYSTEM THAT CHUCKS DOWN ON THE PIPE WITH THE FLIP OF A SWITCH AND UNLOCKS, OR UNCHUCKS WITH A FLIP OF THE REVERSING SWITCH.
NOTE: THE CHUCKING SYSTEM ON THESE UNITS IS DESIGNED TO CHUCK DOWN TIGHTLY ON THE PIPE WHEN ROTATING IN THE FORWARD POSITION, WHILE CUTTING, REAMING OR THREADING.  WHEN YOU STOP THE ROTATION, THE PIPE IS SLIGHTLY LOOSE IN THE JAWS WHICH IS NORMAL!.  WHEN YOU REVERSE THE ROTATION, THE JAWS OPEN UP AND THE PIPE IS FREE TO PULL OUT!  THIS UNIT WILL ALSO DO LEFT HAND THREADING (see the manual).
THIS UNIT INCLUDES A RIDGID COLLAPSABLE ROLLING WHEEL STAND!  ALL DIE TEETH ARE PERFECT, NO CHIPS AND ONE SET IS NEW!  There is a fracture on the plastic around the oil/chip strainer.  Cosmetic only and doesn't affect the return of oil to the reservoir, but wanted to make sure it was mentioned.
THIS UNIT CAN ALSO THREAD UP TO 4"-6" PIPE WITH AN ADDITIONAL ATTACHMENT OF A RIDGID 141, OR RIDGID 161 PIPE THREADER (not included, but available in our other auctions) SEE THE LAST PIC'S SHOWING INSTRUCTION MANUAL (manual included)!  What you see in the pic's is what you get and nothing more!
THIS UNIT "NEW" LISTS FOR
,918.32
WITHOUT THE ROLLING WHEELED STAND,  AND THE 2ND SET OF NEWER DIES!
CHECK OUT THIS LINK...
CLICK HERE!
ADD ON AN ADDITIONAL
9.08
FOR A RIDGID STAND...
CLICK HERE!!!
AND ANOTHER
0.00
FOR THE OTHER SET OF DIES...
FOR A GRAND TOTAL BEFORE SHIPPING AND SALES TAX OF
,888.74
!
NOT HERE!...  YOU CAN "BUY-IT-NOW" FOR ONLY
,875.00
!
STILL SAVING YOU
,200.00+
OVER THE PRICE OF A NEW ONE, AT A LOW COST INTERNET RIDGID DEALER!
THIS IS A
VERY NICE
UNIT!  CHECK OUT THE PIC'S!
WITH THE FOLLOWING DESCRIPTION.......
Model 1822-I
Model 1822-I Threading Machine
Features
Heavy-duty automatic chucking. Threads a wide range of material including black and galvanized pipe, stainless steel, IMC, PVC and heavy-wall conduit
Induction motor (81 db) delivers constant 45 or 16 RPM as required
Constant and proper lubrication of dies and workpiece with through-head oiling
Triple filtration provides for longer oil pump life and clean threads
High impact-resistant covers for durability
Special jaw inserts allows for quick, easy replacement
Specifications
Pipe Capacity:
1/8" - 2" (3 mm - 50 mm), 2 1/2" - 4" (62 mm - 100 mm) with No. 141 Geared Threader
Bolt Capacity:
1/4" - 2" (6 mm - 50 mm)
Motor:
1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction
Motor Control:
Open/Off/Close, heavy-duty rotary type switch and integral safety foot switch
Spindle Speed:
45 and 16 RPM, right hand, can be adapted to left hand operation
Transmission:
Two-speed (45 RPM for standard pipe and 16 RPM for low-voltage and special materials)
Front Chuck:
Automatic gripping/centering
Rear Centering Device:
Automatic, centering only
Cutter:
Model 364, 1/8" - 2" full-floating, self-centering with E-1032 Cutter Wheel
Reamer:
Model 344, 1/8" - 2" right hand only
Clutch:
Shiftable cone type
Oil Pump:
Self-priming gerotor
WE ALSO HAVE GREENLEE 555, 854's & 855's AND RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's,  535's, ETC.
SO,  PLEASE SEE OUR OTHER ITEMS LISTED!
Powered by
eBay Turbo Lister
Add a map to your own listings. FREE Trial!