Seco-Larm Enforcer Access Control Keypad, Outdoor, Surface Mount (SK-1123-SDQ)

Description

Enter your home or office with simple access control by using the Seco-Larm Enforcer Access Control Surface Mount Keypad. This outdoor keypad is not only extremely durable, but also attractive due to its stainless steel faceplate. It can be programmed with up to 1,100 possible user codes and up to 50 possible temporary guest codes. It features a keypad that illuminates when a button is pressed and the backlight can be set to FULL, AUTO, or OFF in standby mode. The keypad features two Form C relay outputs (1A at 30VDC) – one supports 1000 users while the other supports 100 users – both can be programmed to activate for up to 99,999 seconds (nearly 28 hours). User codes can be 4-8 digits long and guest codes can be programmed for one-time or limited-time use. The keypad mounts to a standard, single-gang back box and can be programmed easily and directly from the keypad itself – no need for an external programmer. Plus, the keypad's programmable delayed egress input allows users to exit without entering a code.
12-button outdoor keypad that illuminates when pressed
Supports up to 1,000 possible user codes (000~999) for Output 1 and 100 user codes (001~100) for Output 2
Supports up to 50 (01~50) temporary guest codes (1~99 hours), which can be programed for one time or limited time use
Duress code is signaled if an authorized user is forced to open the door under duress
For a protected area with two doors, the mantrap feature allows only one door to be opened at a time
Super user code gives admin access to keypad
24-hour real time clock provides the baseline time needed to start and stop the Output 1 Auto-Disable Time
Up to 50 (01~50) duress codes for Output 1 and up to 10 (01~10) for Output 2
Keypad can be programmed to beep if door left propped open or forced open
Interlocking input for connecting to a second keypad
EEPROM memory will store programmed information if there's power loss
IP66 weatherproof rating (protects against dust and water)
Installation and Power Details
The keypad supports 12~24V AC/DC universal power, eliminating the need for special programming or jumpers. It wires into a power supply (sold separately) and mounts to the wall with the included screws and back box. In case of a power outage, all your data is stored and reliably retained in the keypad's non-volatile EEPROM memory.
Contents:
Keypad
Back Box
(2) Installation Screws
(3) Mounting Screws
(3) Mounting Screw Anchors
Security Wrench
Diode
Manual
Technical Details
Manufacturer Part #:
SK-1123-SDQ
UPC:
676544012641
Operating Voltage:
12~24 VDC/VAC
Current Draw (at 12VDC):
Standby: 66mA
Keypress: 93mA
Output 1 active: 99mA
Output 1 & 2 active: 126mA
Total Max. Current Draw: 160mA
Outputs:
#1 – Form C: 1A at 30VDC
#2 – Form C: 1A at 30VDC
Key Active: 100mA at 24VDC
Duress: 100mA at 24VDC
Interlock: 100mA at 24VDC
Tamper: N.C. Dry Contact: 50mA at 24VDC max.
Inputs:
Egress: N.O. Ground
Door Sensor: N.O. Ground
Door Inhibit: N.O. Ground
Operating Temperature:
-4° to 158°F (-20° to 70°C)
Operating Humidity:
5 to 95 percent non-condensing
IP Rating:
IP66
Dimensions (including back box):
4-15/16 x 3-1/8 x 2-1/16 inches (125 x 79 x 52 mm)
Weight:
1 pound, 2 ounces (520g)
Warranty:
Limited Warranty