Wireless Mini Welding Gun

Description

Feature:
•No electric soldering iron, safe and convenient, multi-purpose, long life. •Atransparent bottle is used, and the amount of gas filled is clear at a glance. •It is suitable for maintenance and welding of wires, circuit boards, and electrical appliances. •The flame spray is suitable for loose and corroded metal screw kits, plastic packaging, laboratory heating research, kitchen baking workers, etc.
Reminder:
The soldering iron itself does not contain gas, so it needs to be inflated when used. ！（Need to buy gas by yourself）！ This gas soldering iron needs a lighter to ignite and support combustion
How to fill gas ：
1. Use high-purity gas to fill, and confirm that the switch is at 0FF, and then inflate! 2. Fill the gas, introduce the gas into the air hole, press down to inflate. (Note: If there is a hissing sound in the tail after the gas is poured, please use a pen tip or the like to slightly press the air inlet to eliminate it) 3. About 10 seconds, the gas filling can be completed. Wait a few minutes for the gas to stabilize before using it.
How to ignite：
1. Push the switch to the ON position and hear a "hissing" sound 2. Use an igniter or lighter to ignite near the joint. When igniting, be careful not to open the switch too much. It is appropriate to open the middle to allow the gas to continue to heat the soldering iron tip 3. After lighting, adjust the firepower, the direction of 0N is large, and the direction of 0FF is small. 4.The flame temperature of this product is as high as about 1300°C, and the soldering iron is as high as about 450°C. After use, turn off the switch (Note: Do not spray on the head by hand) 5.When using a gas soldering iron, please pay special attention to wait until the flame is completely extinguished and the object inside the soldering iron turns red before proceeding. When adjusting the size of the flame, do not make it too large to extend the life of the soldering iron tip.